- TM9 micro power monitor This product adopts high built-in micro-computer chip and dedicated power measurement chip, with high precision current sensor and LCD display, to achieve complete power monitoring of the equipment. Can be ED for monitoring air conditioners, refrigerators and microwave ovens and other home appliances, but also can be ED as a teaching measuring equipment. At the same time It is also suitable for families, rental housing, office, laboratory and other environmental e.
1 active power measurement
2 monitoring the current RMS voltage
3 Monitoring the current effective value
4 Monitoring the active current power value
5 monitor current voltage frequency
6 record the Total electricity time
7 Calculate and E electricity related carbon dioxide emissions
(Note: 1 degrees electricity produces 0.555 kg of carbon dioxide)
8 adjustment of threshold load d ‘
9 wide LCD alarm
1 Implementation of standards: BC17215-2003 standard
2 Specifications: 50Hz Max 10A 220V (in 2.2KW)
3 Accuracy: 1
4 Constant: 6400imp / kWh
5 Power Consumption: <1 W
6 Weight: about 130 gramas
7 Dimensions: 121x63x20mm
8 Operating temperature: -25 ~ 45
Operation and E:
1 power monitor is inserted into the power outlet, and the plug of the electrical device is inserted into the monitor power socket.
2 LCD socket TABLE indicates the current consumption of power, power, voltage, current, cumulative time, frequency, CO2 emissions.
3 on the electric display Description: on the power after the active power is often the active power value, while the backlight and continues after 5S automatically turned off.
4. Button to display the description: “supercapacitors” button, turn display power, current, voltage, frequency and total time, total consumption, CO2 emissions; press “*”, displayed in reverse order.
5 overload alarm and overload threshold setting function Description:
5.1 overload alarm function: When the measured electrical power value exceeds the set overload power threshold value, the backlight flicker; When the measured electrical power value is less than the overload power threshold value, the backlight stops blinking.
5.2 overload threshold setting function: LCD display screen switch button to “Power” display, then press and hold the “Settings” button for 2 seconds, Penetrate in the entire interface overload, in the same time LCD screen display “XXXX” W which on the left side of the first “x” flashing, Can be through “]” or “supercapacitors” key to change this number (“]” key increasing data key, “supercapacitors” Data main decreasing key), through the “confirmation” button to confirm the end In a digital together; Sequentially from left to right confirm the end of the four numbers, installation of overload threshold is complete. LCD screen to return to the “
6. Compensation time operation: key switch LCD display screen For cumulative display time, and then press the “Settings” button for 2 seconds and enter the clear interface time, this digital LCD flicker, press ” confirm “key data time is cleared. LCD screen return “cumulative time” display items.
7. Power reset operation: key switch LCD display screen with cumulative consumption display item, and then press the “Settings” button for 2 seconds and enter the power reset interface, this digital LCD flicker, press on the “confirm” key cumulative power of data at zero and CO2 emission amount of data was also cleared.