The use of the timer:
The timer can be set, minute, and second. The maximum set is 99:59:59
1: Switch to the TIME position with the TIME – THERMO key, and the setting mode will be displayed as:
00:00 00 – setting mode
2: At the same time press MIN and SEC to reset the timer value (repeat the above operation, can stop setting or resetting)
3: Setting between the MIN and the SEC keys.
Set minutes and hours by MIN, set seconds by SEC.
When SEC or MIN is kept, the corresponding bit value increases rapidly. When the minute value is 60, the hour bit automatically increases by 1.
4: When you have set an error time, reset can be reset (refer to step 2).
5: When you set the correct time, press the START key 1 times.
Note: when the timer has been set, do not press the TIMER – THERMO key, otherwise the set time will be cancelled.
6: When the alarm preparation mode is replaced by the set mode, the timer starts to countdown.
7: When the countdown to 00:00 00, start the alarm.
8: At this time, according to STOP 1 times, stop the alarm.
9: Press the reset, the timer goes back to the initial setting mode.
10: With a 1.1 meter sensing line. (please do not use this product to test objects above 300 degrees centigrade.)
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3cm measuring deviation due to manual measurement.
- Color: white
- The range of use of the thermometer: -50℃~300℃
- Size: 80 x 76 x 14mm/3.15*2.99*0.55″
- Material: plastic
- Power supply: 1*AAA Battery
- Line length: about 77cm/30.31″
- Net weight: 61g
- Function:This device provides alarm functions for a variety of thermometers and timers for kitchen, factory, barbecue and so on.